1 general purpose plastic rectifier reverse voltage 50 to 1000 volts forward current 1.0 ampere features low forward voltage drop low leakage current high forward surge capability high temperature soldering guaranteed 260 /10 seconds,0.375 ? (9.5mm)lead length at 5 lbs(2.3kg) tension mechanical data case: transfer molded plastic epoxy: ul94v-0 rate flame retardant polarity: color band denotes cathode end lead: plated axial lead, solderable per mil-std-202e method 208c mounting position: any maximum ratings and electrical characteristics ratings at 25 ambient temperature unless otherwise specified , single phase, half wave, 60hz, resistive or inductive load. for capacitive load derate current by 20% symbol 1a1 1a2 1a3 1a4 1a5 1a6 1a7 unit maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 volts maximum rms voltage v rms 35 70 140 280 420 560 700 volts maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 volts maximum average forward rectified current(fig.1) 0.375 ? (9.5mm) lead length at t a =25 i (av) 1.0 amps peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) i fsm 30 amps maximum instantaneous forward voltage @ 1.0a v f 1.1 volts maximum dc reverse current at rated dc blocking voltage t a = 25 i r 5.0 ua t a = 100 100 typical junction capacitance (note 1) c j 25 pf typical thermal resistance (note 2) r ja 60 /w operating and storage temperature range t j , t stg -55 to +150 1- measured at 1.0mhz and applied reverse voltage of 4.0 volts. 2-thermal resistance from junction to ambient at. 375 ? (9.5mm)lead length, p.c. board mounted. 1a1 thru 1a7 r-1 website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 dimensions in inches and (millimeters)
2 ratings and characteristic curves note: specifications are subject to change without notice. 1a1 thru 1a7 website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099
|
